Product Description
- Content:100% Vinyl | Urethane Topcoat
- Width:54 inches
- Roll Size:30 yards
- Finish:SILVERGUARD® PermaBlock3®
- Backing:Soft Hi-Loft2 Backing
- Railroaded:No
- Repeat:H- 11/16 in. V- 11/16 in.
- Market:Corporate Interiors, Hospitality, Healthcare
- Primary Application:Upholstery
- Abrasion:75,000 Double Rubs
- Cold Crack:-20°F
- UltraViolet Resistance:1000 Hours
- Anti-Bacterial
- Anti-Microbial
- Mildew Resistant
- Sulfide Stain Resistant
- Anti-Static
- California Tech. Bulletin 117 Section E
- UFAC Class 1
- NFPA 260 Class 1
- Federal Motor Vehicle Safety Standard (MVSS) 302
- Boston Fire Code Test BFD IX-1
- New York / New Jersey Port Authority
- IMO A.652 (16)
- FAR 25.853
- Federal St. 191A M 5903.1
- Upholstery vinyls are easy to clean. To prevent build-up of dirt and contaminants, which may cause permanent staining, periodic cleaning is highly suggested. The frequency of cleaning is dependent upon the environmental conditions under which the product is subjected.Antiseptic surface treatment: Liberally apply diluted disinfectant using a sponge, rinse with cold water several times, then wipe dry. Dilution Rates: 6% Clorox® – 94% water, 6% Purex® – 94% water, 6% Javex® – 94% water, Fantastik®, Lysol® (uncolored solutions), Dettol Solution, or Formula 409®.Normal Office/Household Use: Most stains can be easily cleaned using warm, soapy water and clear water rinses. Moderate scrubbing with a medium bristle brush will help to loosen soiling materials from the depressions of embossed surfaces. For more stubborn stains, use commercially available mild detergents (Formula 409®, Fantastik®, Mr.Clean®) in accordance with the manufacturer’s instructions. Full strength rubbing alcohol or mineral spirits may be tried with caution if the listed cleaners do not work. Indiscriminate use of strong solvents can severely damage or discolor vinyl.